New message
To sales@dozalink.com

We'll also add you to our mailing list. Unsubscribe anytime. See our Privacy Policy.

A consistent dose on every car: why operators and chemical companies both want it

A fountain drink should taste the same every time, with not too much syrup and not too little. Car wash chemical is no different. Whether you operate the wash or provide a chemical service, you want an accurate and precise dose on every car.

What a fountain drink gets right

Fountain soda is syrup and water mixed as it pours, often about five parts water to one part syrup. With too much syrup the drink is too sweet and the restaurant has poured away margin. With too little it tastes flat and the customer notices. Nobody orders more syrup or less syrup. They want the drink they had last time.

A wash has the same two ways to go wrong. Too little chemical and the car comes out less than clean. Too much and someone paid for chemical that did nothing useful. The goal is the right amount on every car, at every site, on a busy Saturday and a slow Tuesday.

With a venturi, a good operator or service company sets this up carefully, testing and adjusting tips until the chemical is right. What's hard is keeping it there, because a venturi has no dose of its own. It draws chemical using the water moving through it, so a change in water pressure can move the amount, and so can a tip that wears or clogs. Neither one tells you it happened. The first sign is usually a drum that ran out early or cars that don't look right.

A rate for most chemical, a set dose for tire shine

Most chemical is sprayed for as long as a step is on, so strength is what counts. A Doza Pump runs at a rate you set, such as 1 mL/s, for as long as the relay is on. A long truck keeps the sprayers on longer than a compact car and gets more chemical at the same strength.

Tire shine is different. Every car has four wheels, so operators usually set an amount, such as 12 mL, that runs each time the controller triggers it.

If you think in ratios, set the rate from your water flow. An arch running 1 gallon a minute is about 63 mL/s, so 0.5 mL/s comes out near 126:1.

A number that stays put

On a Doza Pump, the rate is a number and the pump delivers it. It's a peristaltic pump, so it pushes chemical into the line itself, and when it feeds an injector, the suction pulls only what the pump delivers. Your water still has to be right, as it does on any wash, but a change in water pressure no longer changes how much chemical goes out.

Dose repeatability is about ±1% when you calibrate it to your own chemical and rate. The tube is a wear part and chemical thickens in the cold, so check the calibration periodically, especially after replacing the tube or as the seasons change. DozaLink tracks tubing lifespan, so you can see when it's time for a replacement.

To change a dose, you change the rate rather than swap a tip, and you can use the same setting at every site.

What a wandering dose costs

Take the example package from our cost per car guide, at $0.69 a car. If it runs 10% over, that's $0.07 more on every car, or about $4,100 a year at 60,000 cars. Who carries that cost depends on who looks after your chemical:

Who looks after itIf the dose runs highIf the dose runs low
You manage your own chemicalYou pay for it on the next orderCars look worse, rewashes cost you again, and customers may not come back
A chemical company, billing by the gallonYou pay for it, and the bill needs explainingResults slip, and the product gets the blame
A chemical company, at a set price per carThe chemical company's margin shrinksThe wash gets less than was quoted, and results slip

Nobody in that table chose any of it, and each of them is better off with a dose that stays where it was agreed. Trade writing makes the same point: whatever over-application you cut goes straight to the bottom line.

One meter you can both read

Nobody argues with a gas station about how much fuel went in, because there's a meter you can both read. A shared record does the same job for chemical. With DozaLink, use and cost show up by site, chemical and device. A change to a dose is limited by role and kept in the Audit log with the name, the time, and the values before and after, and people with access to that site can get an alert when it happens. Conversations start from the same numbers, which makes a good working relationship easier to keep.

Its cost per car uses an estimate of washes, so compare it with your controller's car count from time to time, especially if a contract depends on it.

If you run the wash

You get a consistent dose on every car, at every site, and a cost per car you can see for yourself. Working with a chemical company doesn't change. Give them Operator access to the sites they look after, so they can adjust a dose from anywhere, calibrate on their visits and record each refill. If a dose changes, you're both looking at the same numbers when you talk about it.

If you supply the chemical

A set price per car is a promise built on a dose. A metered pump lets you quote from a real number and see a site move away from it before it reaches your margin. It also backs up your work: your customer can see that what you quoted is what each car gets.

You can bundle the pumps into your chemical contract, whether you sell them to the customer or keep ownership of the equipment. Run them from DozaLink, lock the local controls so changes are limited by role and recorded, and check the stock at each site before you send someone out. Your customer gets Viewer access to devices, activity and reports, along with the history of dose changes. A Viewer can't change a dose, so a change starts with a conversation, which suits both of you.

Supplying several customers? Talk to us about how to set them up, so each one sees only their own sites and pricing.

If you manage your own chemical

Plenty of operators buy their own chemical and swap the drums themselves. Everything above still applies, because you're both the buyer and the service company. Calibrate to your chemical, set a dose, and watch your cost per car. When a price or a product changes, you'll see what it does to the number.

Knowing when to reorder

Fountains run out of syrup too, and they keep pouring until someone tastes it. A wash can do the same: a drum runs dry, and nobody notices until the cars look wrong.

Record each refill in DozaLink, and it subtracts recorded doses, charts your stock over time, and estimates the days of supply left at your recent pace, which helps you plan the next order. Set a low-stock reminder, and everyone with access to that site who has low-stock alerts on gets a message on their phone, by email, or both. The site manager and the chemical company can get the same reminder, so a drum running low is no surprise to either of them.

Count only the drum connected to the pumps, and make sure whoever does the refills has Operator access or above, because a Viewer can't update stock.

Who holds which role

Either side can own the setup. These are good starting points:

Who owns the pumpsThey holdThe other side gets
Chemical companyOwner and AdminCustomer as Viewer, or Operator if they adjust their own doses
Operator, with a chemical companyOwner and AdminChemical company as Operator at the sites they look after, or Viewer
Operator, managing their own chemicalOwner and AdminNobody needed

Whatever their role, people with access to a site can read its dose and calibration changes in the Audit log. There's more on this in who changed the dose.

You can click through these screens in the live demo. Run a wash? Tell us about your sites. Supply chemical? Tell us about your customers.

Know what every wash costs.

Tell us about your wash and which chemicals you run. We reply to every message.

Or email us at sales@dozalink.com